Your Cart

Wireless / GPS & Modules

Adapter Plates ESP
OVERVIEW:About the Adapter Board: Used to convert the IO ports of ESP-12-F to 2.54mm pitch pin headers,so it is easy for beginner to test ESP-12-F...
Overview:The BeagleBone Black Wireless is a low-cost, credit-card-sized development platform with good support from a fast-growing community. Replacing the 10/100 Ethernet port with onboard 802.11 b/g/n 2.4GHz WiFi and Bluetooth, the BeagleBone Black computer now comes with built-in wireless..
Product Description1. Model HC-05.2. Use the CSR mainstream bluetooth chip, bluetooth protocol standards.3. Module working voltage 3.3 V.4. Potter default rate of 9600, the user can be set up.5. The core module size : 28 mm x 15 mm x 2.35 mm.6. Working current: matching for 30 MA, matching the commu..
Description:About Bluetooth HC-06 Chip:1. HC-06 Bluetooth chip protocol standards2. Operating voltage: 3.3V.3. Baud rate 1200,2400,4800,9600,19200,38400,57600,115200 user can set.3. Size: 28mm x 15 mm x 2.35mm.4. Work Current 20 ~ 30MA when pairing, 8MA after paired5. Used for the GPS navigation sys..
Brand: Sparkfun
OVERVIEW:This is a simple breakout board for the popular XBee product from Digi. This board breaks out all 20 pins of the XBee to a 0.1" standard spacing dual row header. The spacing between 0.1" headers is 0.5" making it breadboard DIP friendly. We highly recommend using the female sockets to avoid..
OVERVIEW:The XBee USB Adapter V2 is an update version from DFRobot. It features an Atmega8U2 programmed as a USB-to-serial converter, the same chip found on the Arduino Uno. The Atmega8U2 firmware uses the standard USB COM drivers, and no external driver is needed. However, on Windows, a .inf..
OVERVIEW:ESP32 is already integrated antenna and RF balun, power amplifier, low-noise amplifiers, filters, and power management module. The entire solution takes up the least amount of printed circuit board area.This board is used with 2.4 GHz dual-mode Wi-Fi and Bluetooth chips by TSMC 40nm lo..
The ESP8266 WiFi Module is a self contained SOC with integrated TCP/IP protocol stack that can give any microcontroller access to your WiFi network. The ESP8266 is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor. Each ESP8266 m..
OVERVIEW:ESP-12-F is an enhanced version ESP8266-12 , improve the external circuit, enhanced impedance signal output is better, whether it is stable or anti-jamming capability , have been greatly improved ! If you use the ESP-12 previously, it does not matter even if the product has been made , enha..
Description:The Amica NodeMcu Lua WIFI Development Board is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from a..
Description:The LoLin V3 NodeMcu Lua WIFI Development Board is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions fro..
Features:This cheap and small Wifi transciever is the perfect solution for home Automation and IoT applications. It can be the replacement of your NRF24L01, it can talk to your Wifi router directly through the UART MCU's (Rx, Tx).The ESP-12 module is one of the most complete of the ESP family as it ..
GY-NEO6M V2 GPS Module
FEATURES:The NEO6MV2 GPS module is quite easy to incorporate with Arduino, ESP8266 and Raspberry Pi.Communication Mode: TTL level, compatible with 3.3V/5V systemPower Supply: DC 2.7-5VWorking Current: 45MATXD RXD Impedance: 510RDefault Baud Rate:9600Catching Time: Warm start: 1sCold start: 27sWorkin..
OVERVIEW:The next evolution of the rotor revolution is here!! The KK2.1.5 is packing new found power with updated sensors, memory and header pins.The KK2.1.5 is next big evolution of the first generation KK flight control boards. The KK2.1.5 was engineered from the ground up to bring multi-rotor fli..
FEATURES:JMT Simonk Firmware  30A ESC Electric Speed Controller with 5V 3A BEC for 2 to 4s Lipo Battery Specification:weight: 25 gInput voltage:2-4SWorking current:30ABEC output: 5V 3A..
OpenPilot CC3D Flight Controller Multi Rotor
OVERVIEW:The CopterControl, CC3D and Atom flight controllers are all types of stabilisation hardware which run the OpenPilot firmware. They can be configured to fly any airframe from fixed wing to an octocopter using the OpenPilot Ground Control Station (GCS) software.The CopterControl was the first..
SPECIFICATION:Transmitter : Working voltage: 3V - 12V  fo max. power use 12VWorking current: max  Less than 40mA max , and min 9mAResonance mode: (SAW)Modulation mode: ASKWorking frequency: Eve 315MHz  Or  433MHz Transmission power: 25mW (315MHz at 12V)Frequency error: ..
The MFRC522 is a highly integrated reader/writer IC for contactless communication at 13.56 MHz. The MFRC522 reader supports ISO/IEC 14443 A/MIFARE and NTAG. The MFRC522’s internal transmitter is able to drive a reader/writer antenna designed to communicate with ISO/IEC 14443 A/MIFARE cards and tr..
OVERVIEW:The RDM6300 is a RFID module that reads 125KHz RFID Tags, The RDM6300 is a popular RFID Reader for low cost  projects such as office/home security, personal identification, access control, interactive toy, and production control systems etc . The module sends data via UART protocol, ma..
Brand: Sim Com
OVERVIEW:Working frequency: GSM900/1800MHzCan realize the voice call, SMS (short message, MMS), GPRS data transmission function (support passthrough mode DNS and IP mode), but also has DTMF decoding (can identify the buttons) TTS (local speech optional) and bluetooth (optional).Hardware design optim..
Brand: Sim Com
OVERVIEW:This GPRS GSM module based on the SIMCom SIM800L, which it a GSM GRPS Quad-Band module. You can add voice, text, SMS and data to your project with this module. Sim800L is an ideal solution for M2M applications, suitable for automotive, industrial and PDA, personal tracking, electricity envi..
SIM808 GSM+GPRS+GPS Module with Antenna
-18 % Inquiry
Brand: Sim Com
Quad-band 850/900/1800/1900MHz - connect onto any global GSM network with any 2G SIM (in the USA, T-Mobile is suggested)Fully-integrated GPS (MT3336 chipset with -165 dBm tracking sensitivity) that can be controlled and query over the same serial portMake and receive voice calls using a headset or a..
Rs4,500/- Rs5,500/-
Sim900a GSM Module
Brand: Sim Com
SIM900A is an ultra-compact and reliable wireless module. It is a Dual-band GSM/GPRS module in a SMT type and is great for wireless cost-effective solutions.Featuring an industry-standard interface, the SIM900A delivers GSM/GPRS 900/1800MHz performance for voice, SMS, Data, and Fax in a small fo..
FEATURES:Technical data sheet describing the cost effective, high-performance u-blox 6 based NEO-6 series of GPS modules, that brings the high performance of the u-blox 6 positioning engine to the miniature NEO form factor. These receivers combine a high level of integration capability with fle..
Waveshare SIM808 GSM/GPRS/GPS Shield with Antenna and Adapter
Brand: Sim Com
OVERVIEW:Onboard USB TO UART converter CP2102 for UART debugging5 x LEDs for indicating the module working statusOnboard voltage level converter, supports both 3.3V and 5V systemsSIM card slot for 1.8V/3V SIM cardBaudrate auto detection (1200bps ~115200bps)Bluetooth 3.0, supports data transferring t..
OVERVIEW:is the XBee XB24-Z7WIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between arduino micro..
XBee Pro 60mW Wire Antenna
Out Of Stock
OVERVIEW:This is the very popular 2.4GHz XBee XBP24-AWI-001 module from Digi (formerly known as Maxstream). The Pro series have the same pinout and command set of the basic series with an increase output power of 60mW! These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a s..
Arduino GPS shield is a GPS module breakout board designed for Global Positioning System receiver with SD interface. It is easy to use for recording the position data into SD card. 5V/3.3V compatible operation voltage level make it compatible with Arduino boards, leaf maple, IFlat32 and other arduin..
Showing 1 to 31 of 31 (1 Pages)