Menu
Your Cart

Fluke 116 Digital Multimeter

Fluke 116 Digital Multimeter
Inquiry
Fluke 116 Digital Multimeter
  • Stock: Inquiry
  • Brand: Fluke
  • Model: MTDM-30
Rs27,720/-

OVERVIEW:

The Fluke 116 comes with the Fluke 80BK-A integrated DMM temperature probe; no need to carry a separate thermometer. The microamp function allows flame sensor measurement down to 0.1 microamps. The AutoV/LoZ function prevents false readings caused by ghost voltage. The Fluke 116 also has a large white LED backlight for work in poorly lit areas. It measures resistance, continuity, frequency, and capacitance and provides Min/Max/Average readings with elapsed time to record signal fluctuations.

Fluke 116 multimeters are independently tested for safe use in CAT III 600 V environments.

True RMS measurements and optimized ergonomics make the Fluke 323 True RMS Clamp Meter the best general purpose clamp meter for commercial and residential electricians. The Fluke 323 model is ideally suited for current measurements up to 400 A in tight cable compartments.

FEATURES:

Built-in thermometer for HVAC applications

Microamps to test flame sensors

Low input impedance: helps prevent false readings due to ghost voltage

Large white LED backlight to work in poorly lit areas

Resistance, continuity, frequency and capacitance

Min/Max/Average with elapsed time to record signal fluctuations

Compact ergonomic design for one-handed operation

Compatible with optional magnetic hanger (ToolPak™)

CAT III 600 V safety rated

SPECIFICATION:

Maximum voltage between any terminal and earth ground

600 V

Surge protection

6 kV peak per IEC 61010-1 600 V CAT III, Pollution Degree 2

Display

6,000 counts, updates 4 per second

Bar graph

33 segments, updates 32 per second

Operating temperature

-10°C to +50°C

Storage temperature

-40°C to +60°C

Battery type

9 volt Alkaline, NEDA 1604A/ IEC 6LR61

Battery life

400 hours typical, without backlight

Accuracy Specifications

DC millivolts

Range/Resolution

600.0 mV / 0.1 mV

Accuracy

±([% of reading] + [counts]): 0.5% + 2

DC volts

Range/Resolution

6.000 V / 0.001 V
60.00 V / 0.01 V
600.00 V / 0.1 V

Accuracy

±([% of reading] + [counts]): 0.5% + 2

Auto volts

Range/Resolution

600.0 V / 0.1 V

Accuracy

2.0% + 3 (DC, 45 Hz to 500 Hz)
4.0% + 3 (500 Hz to 1 kHz)

AC millivolts¹ True RMS

Range/Resolution

600.0 mV / 0.1 mV

Accuracy

1.0% + 3 (DC, 45 Hz to 500 Hz)
2.0% + 3 (500 Hz to 1 kHz)

AC volts¹ True RMS

Range/Resolution

6.000 V / 0.001 V
60.00 V / 0.01 V
600.0 V / 0.1 V

Accuracy

1.0% + 3 (DC, 45 Hz to 500 Hz)
2.0% + 3 (500 Hz to 1 kHz)

Continuity

Range/Resolution

600 Ω / 1 Ω

Accuracy

Beeper on < 20 Ω, off > 250 Ω; detects opens or shorts of 500 μs or longer.

Ohms

Range/Resolution

600.0 Ω / 0.1 Ω
6.000 kΩ / 0.001 kΩ
60.00 kΩ / 0.01 kΩ
600.0 kΩ / 0.1 kΩ
6.000 MΩ / 0.001 MΩ

Accuracy

0.9% + 1

Range/Resolution

40.00 MΩ / 0.01 MΩ

Accuracy

1.5% + 2

Diode test

Range/Resolution

2.000 V / 0.001 V

Accuracy

0.9% + 2

Capacitance

Range/Resolution

1000 nF / 1 nF
10.00 μF / 0.01 μF
100.0 μF / 0.1 μF
9999 μF / 1 μF
100 μF to 1000 μF

Accuracy

1.9% + 2

Range/Resolution

> 1000 μF

Accuracy

5% + 20%

LoZ capacitance

Range

1 nF to 500 μF

Accuracy

10% + 2 typical

Temperature² (Type-K thermocouple)

Range/Resolution

-40°C to 400°C / 0.1°C

Accuracy

1% + 10²

Range/Resolution

-40°F to 752°F / 0.2°F

Accuracy

1% + 18²

AC μamps True RMS (45 Hz to 500 Hz)

Range/Resolution

600.0 μA / 0.1 μA

Accuracy

1.0% + 2

DC μamps

Range/Resolution

600.0 μA / 0.1 μA

Accuracy

1.0% + 2

Hz (V or A input)²

Range/Resolution

99.99 Hz / 0.01 Hz
999.99 Hz / 0.1 Hz
9.999 Hz / 0.001 Hz
50.00 Hz / 0.01 Hz

Accuracy

0.1% + 2

 


Product Manual


Fluke 116 Digital Multimeter Manual

Write a review

Note: HTML is not translated!
Bad Good