Your Cart

Sensors & Modules

Buy Sensors and Modules products online at best price in Pakistan. Get genuine 2019 Sensors and Modules components like Accelerometer/Gyrometer, Assorted Modules & Sensors, Biometric, Current, Infrared & Laser, Power Modules, Temperature/Humidity, Ultrasonic, Water Flow Sensor at lowest price in Karachi, Lahore, Islamabad, Multan, Peshawar & across Pakistan.

Explore, Get 2019 latest Sensors and Modules products & other electronic components at discounted price in Pakistan with free cash on delivery service across Pakistan. We are Sensors and Modules Pakistan official distributor.

OVERVIEW: Sensitive material of MQ-7 gas sensor is SnO2, which with lower conductivity in clean air. It make detection by method of cycle high and low temperature, and detect CO when low temperature (heated by 1.5V). The sensor’s conductivity is more higher along with the gas concentration ..
Buy all kinds of electronic products from W11 STOP. Fast delivery service, quality products with the  best reasonable rate available in the whole market of Pakistan...
Material: ABS + MetalCollector current: 100mADC forward current (If): 60mAOutput type: Photo transistorVoltage: 70V (Max) Detection method: ReflectionDetection distance: 0.591" (15mm)Pin patch: 0.25cmSuitable for multi-media devices, infrared receiver head of remote controller..
OVERVIEW:Product Name : Breadboard Power Supply Module ;Fit for : MB102 BreadboardInput Voltage : DC 6.5-12V;Output Voltage : DC 3.3V 5VOutput Current : 700mA(Max);Total Size : 51 x 32 x 19mm/ 2" x 1.3" x 0.75" (L*W*H)Material : Plastic, Electronic Part;Net Weight : 13gPackage Content : 1 x Breadboa..
OVERVIEW:This Power Module is a small size 5A 350KHz 25V Buck DC to DC Converter.It can convert any DC voltage between 3.6V-25V to a selectable voltage from 3.3V to 25V.You can choose 5V direct output voltage with the switch or adjust the output voltage by the blue&white resistor.It i..
OVERVIEW:This PH sensor Module consists of PH sensor also called as PH probe and a Signal Conditioning Board which gives an output which is proportional to the PH Value and can be interfaced directly to any Micro-controller.The pH sensor components are usually combined into one device called a combi..
HC-SR04 Mounting Bracket Holder for Smart Car
Out Of Stock
Holder made up of strong plastic.Best for robot car chassis.Holes also given for attachment with car..
Emitted Colour : Infrared.Size: 5mm.Lens Color : Black Clear.Forward Voltage (V) : 1.2-1.4V.Forward Current (mA): 100mA.Wavelength (nm): 940nm. ..
Diameter : 5MMwavelength:940nmForward Voltage: 1.2-1.3V1 x IR Transmitter..
Brand: TES Product
FEATURES:AR932 is a stable, safe and reliable coating thickness gauge for fast,accurate and nondestructive measurement of the thickness of non-magnetic coatings(such as paint, electroplated coating and film)on magnetic metal substrates.Automatically identify sustrate material and display on the LCD...
Brand: TES Product
OVERVIEW:The coating thickness gauge can non-destructively measure the thickness of non-magnetic coatings on magnetic metal substrates ( such as iron and hard magnetic steel) (such as aluminum, chromium, copper, tantalum, rubber, paint, etc.) and non-magnetic metal substrates (such as The thickness ..
Brand: Arduino
OVERVIEW: What is 37 in 1 Sensor Kit?1) A complete set of Arduino's most common and useful electronic components.2) East to find sample code on Arduino official website to get started.3) Use for Arduino / Raspberry Pi & MCU Education User.4) A Open-Source Sensor Ki..
DPDC112000 Ducted Temperature and Humidity Sensor
OVERVIEW:DPDC112000 - Ducted Temperature Temperature (-10T60 °C) and humidity (10 to 90% rH) sensorThe CAREL DP series electronic probes are designed for air-conditioning and air handling, heating and refrigeration applications, to be used in combination with the corresponding CAREL controllers. Ver..
OVERVIEW:This is a basic, 4-digit 7-segment display. It has a common anode. The display features one decimal point per digit, and individually controllable apostrophe and colon points.The LEDs have a forward voltage of 2.1VDC and a max forward current of 20mA. The hardware interface is sixteen (two ..
OVERVIEW:The DFRobot Adjustable Infrared Sensor Switch is a set of transmitter and receiver in one of the photoelectric switch sensor. The detection distance can be adjusted according to the demand. The DFRobot Adjustable Infrared Sensor Switch is small, easy to use, inexpensive, easy to ass..
OVERVIEW:The DFRobot Heart Rate Monitor Sensor is used to measure the electrical activity of the heart. This electrical activity can be charted as an ECG and output as an analog reading. An ECG signal can be extremely noisy so we have included an AD8232 chip on the PCB which will provide a cl..
TEC1-12706 Thermoelectric Cooler Peltier 12V 60WTEC1-12706Voltage(V): 12V Umax (V): 15.4V Imax (A): 6AQMax (W) : 92WDimensions : 40mm x 40mm x 3.6mm..
Thermoelectric coolers (TEC) operate according to the Peltier effect. The effect creates a temperature difference by transferring heat between two electrical junctions. When the current flows through the junctions of the two conductors, heat is removed at one junction and cooling occurs at the other..
OVERVIEW:Thermoelectric Cooler (Peltier Module) - TEC1-12710:Utilized in high-end consumer, commercial, and military-grade applications for extreme performance and maximum energy efficiency, TEC1 Peltier Modules provide unmatched temperature differentials (DTmax) in cooling or heating applications.H..
OVERVIEW:Solid state, vibration free, noise-freeSimple to install and operateThe hot surface need to be good heat sinkSPECIFICATION:Color: whiteCouples: 127Voltage: 12VUmax: 15.4VImax: 15AMax power consumption: 231WTmax: 70°CQcmax â–³T=0(W): 137WSize: 40 x 40 x 3.3mmWeight: 50g..
OVERVIEW:A thermoelectric cooling (TEC) module is a semiconductor-based electronic component that functions as a small heat pump. By applying DC power source to a TEC, heat will be transferred from one side of the module to the other. It creates a cold and hot side. They are widely used in industria..
FEATURES:Solid state, vibration free, noise-free. Simple to install and operate.Each device is fully inspected and tested.Fitted with 2.85 inch insulated leads .Perimeter sealer for moisture protection.This device must be used in conjunction with a heat sink to avoid burned.Get ice cold in minu..
FEATURES:The module is a 12-foot clock with 4 points of positive digital (0.36 inches) display module driver IC TM1637, only two signal lines can make SCM four 8-segment LED.Module features are as follows:Display of male red for the four digital tubeAdjustable digital tube 8 grayLevel control interf..
Brand: Arduino
 Application module;1. The intelligent car or robot line (including black and white lines), walked along the black line path, also known as tracing. 2. The intelligent car cliff avoidance, prevent fall off. 3. The smart car obstacle avoidance 4. Can be used in other automatic photoelect..
A simple flex sensor 2.2" in length. As the sensor is flexed, the resistance across the sensor increases. The resistance of the flex sensor changes when the metal pads are on the outside of the bend (text on inside of bend).Connector is 0.1" spaced and bread board friendly...
A simple flex sensor 4.5" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the original Nintendo Power Glove. The resistance of the flex sensor changes when the metal pads..
The Grove - Gas Sensor(MQ2) module is useful for gas leakage detection (in home and industry). It is suitable for detecting H2, LPG, CH4, CO, Alcohol, Smoke or Propane. Due to its high sensitivity and fast response time, measurements can be taken as soon as possible. The sensitivity of the sensor ca..
OVERVIEW:MQ-4 gas sensor modules are used in gas leakage detecting equipments in family and industry, are suitable for detecting of CH4,Natural gas.LNG, avoid the noise of alcohol and cooking fumes and cigarette smoke.Features:High sensitivity to CH4,Natural gasSmall sensitivity to alcohol, smokeFas..
FEATURES:When the sensor senses a magnetic field, the digital output is low and the signal light is on; if no magnetic field is sensed, the digital output is high and the signal is not lit.With power indicator and signal indicator.Small volume, high sensitivity, fast response speed, good temperature..
Brand: Arduino
OVERVIEW:The KY-024 Linear magnetic Hall sensor reacts in the presence of a magnetic field. It has a potentiometer to adjust the sensitivity of the sensor and it provides both analog and digital outputs.  The digital output acts as a switch that will turn on/off when a magne..
OVERVIEW:This module can be used to detect the presence of an magnetic field. If there is an magnetic field present, it will report a high level signal. It can be used in many applications such as RPM sensor (for counting the number of shaft revolutions), Robot speed and distance measurements, door ..
This sensor sits in line with your water line and contains a pinwheel sensor to measure how much liquid has moved through it. There's an integrated magnetic hall effect sensor that outputs an electrical pulse with every revolution. The hall effect sensor is sealed from the water pipe and allows the ..
Brand: Arduino
FEATURES:CLK - equivalent to output A in regular encoderDT - equivalent to output B in regular encoderGND - equivalent to output C in regular encoderSW - reset switch+ (VCC) - positive supply to the unit,Material: Electronic components + PCBSize: About 31 * 19 * 29mm / 1...
This is a light dependent resistor (LDR). Its resistance change according to ambient light. It is also called photoresistance, photo resistor, light sensor, photocell, photodetector, CdS or photoconductive cell.LDR 3mm - PhotocellFeatures:Coated with epoxyGood reliabilitySmall volumeHigh sensitivity..
FEATURES:Within 250 V AC voltage can be measured. Linear range: 0-1000V 0-10mA(Sampling resistor is 100ohm) Installation : PCB mounting (Pin Length> 3mm)onboard micro-precision voltage transformer. Ratio: 1000:1000Analog output corresponding quantity can be adjustedGood consistency, for voltage a..
This is a light dependent resistor (LDR). Its resistance change according to ambient light. It is also called photoresistance, photo resistor, light sensor, photocell, photodetector, CdS or photoconductive cell.LDR 12mm - PhotocellFeatures:Coated with epoxyGood reliabilitySmall volumeHigh sensitivit..
Magnetic Reed Switch Door Sensor
Out Of Stock
OVERVIEW:The reed switch contains a pair (or more) of magnetizable, flexible, metal reeds whose end portions are separated by a small gap when the switch is open. The reeds are hermetically sealed in opposite ends of a tubular glass envelope. The basic glass reed switches are relatively fragile..
This is a light dependent resistor (LDR). Its resistance change according to ambient light. It is also called photoresistance, photo resistor, light sensor, photocell, photodetector, CdS or photoconductive cell.LDR 20mm - PhotocellFeatures:Coated with epoxyGood reliabilitySmall volumeHigh sensitivit..
HMC5883L 3-axis magnetometer breakout board. Communication with the HMC5883L is simple and all done through an I2C interface. There is an on-board voltage regulator regulator, so a supply voltage of between 3.3V and 6V DC should be supplied.There is also on-board logic level conversion of the I2C pi..
Brand: Arduino
SPECIFICATION: Part NO. MPX5700AP Package 6-SIP, Top Port Description IC PRESSURE SENSOR ABS 6-SIP Pressure Type Absolute Operating Pressure 2.18 ~ 101.5 PSI ..
OVERVIEW:For microcontrollers without an analog-to-digital converter or when you want a higher-precision ADC, the ADS1115 provides 16-bit precision at 860 samples/second over I2C. The chip can be configured as 4 single-ended input channels, or two differential channels. As a nice bonus, it even incl..
Description:This is a breakout board for Freescale's MPR121QR2. The MPR121 is a capacitive touch sensor controller driven by an I2C interface. The chip can control up to twelve individual electrodes, as well as a simulated thirteenth electrode. The MPR121 also features eight LED driving pins. When t..
FEATURES Operating Voltage is +5V Can be used to Measure Ammonia, Carbon monoxide Analog output voltage: 0V to 5V Digital Output Voltage: 0V or 5V (TTL Logic) Preheat duration over 24 hours Can be used as a Digital or analog sensor The Sensitivity of Digital pin can ..
OVERVIEW:1. with the signal output LED indication;2. 2-way signal output (analog output, and TTL-level output);3. TTL output valid signal is low; (low output signal light, which can be accessed microcontroller IO port)4. analog output increases with the concentration, the higher the voltage the high..
OVERVIEW:Sensitive for LPG, natural gas, coal gasOutput voltage boosts along with the concentration of the measured gases increasesFast response and recoveryAdjustable sensitivitySignal output indicator..
OVERVIEW:The MQ-6 module are used in gas leakage detecting equipment in family and industry, are suitable for detecting of LPG, iso-butane, propane, LNG, avoid the noise of alcohol and cooking fumes and cigarette smoke.The module gives out the concentration of the gases as a analog voltage equi..
Voice Recognition Module V3.0
OVERVIEW:This product is a speaker-dependent voice recognition module. It supports up to 80 voice commands in all. Max 7 voice commands could work at the same time. Any sound could be trained as command. Users need to train the module first before let it recognizing any voice command.This board has ..