Menu
Your Cart

Arduino Accessories

OVERVIEW:The Duinopeak GPS Logger Shield equips your Arduino with access to a GPS module, µSD memory card socket, and all of the other peripherals you’ll need to turn your Arduino into a position-tracking, speed-monitoring, altitude-observing wonder logger. The shield is based around a uBlox’s N..
Rs4,000/-
OVERVIEW:- Quantity: 1- Material: Circuit board- Memory storage: 24C32 32K I2C EEPROM- With LIR2032 rechargeable lithium battery and rechargeable circuit- With reading and writing function- Using time: About 1 year (Fully charged)- Provide clock signal for microcontroller- Cascade other I2C devices-..
Rs250/-
Brand: Arduino
OVERVIEW: What is 37 in 1 Sensor Kit?1) A complete set of Arduino's most common and useful electronic components.2) East to find sample code on Arduino official website to get started.3) Use for Arduino / Raspberry Pi & MCU Education User.4) A Open-Source Sensor Ki..
Rs2,000/-
Jumper wires are a fantastic way to prototype.  These wires are designed to fit snugly into 0.1" (2.54mm) male headers, and the male and female versions connect together with a satisfying click.Length: 150mm (5.9in)Colours: Brown, white, red, black, green, purple, blue, orange, yellow, grey..
Rs5/-
Vin: 3 to 5VDCLogic: 3 to 5V compliantPressure sensing range: 300-1100 hPa (9000m to -500m above sea level)Up to 0.03hPa / 0.25m resolution-40 to +85°C operational range, +-2°C temperature accuracyThis board/chip uses I2C 7-bit address 0x77...
Rs120/-
Brand: Arduino
Vin: 3 to 5VDCLogic: 3 to 5V compliantPressure sensing range: 300-1100 hPa (9000m to -500m above sea level)Up to 0.03hPa / 0.25m resolution-40 to +85°C operational range, +-2°C temperature accuracyThis board/chip uses I2C 7-bit address 0x77...
Rs120/-
Vin: 3 to 5VDCLogic: 3 to 5V compliantPressure sensing range: 300-1100 hPa (9000m to -500m above sea level)Up to 0.03hPa / 0.25m resolution-40 to +85°C operational range, +-2°C temperature accuracyThis board/chip uses I2C 7-bit address 0x77...
Rs120/-
Brand: Arduino
Compatible with Arduino UNO and Arduino Mega.  DS3231 is a low-cost, extremely accurate I2C real-time clock (RTC), with an integrated temperature-compensated crystal oscillator (TCXO) and crystal. The device incorporates a battery input, disconnect the main power supply and maintains accur..
Rs250/-
Brand: Arduino
OVERVIEW:DS1302 is introduced trickle charge the clock chip, containing a real-time clock / calendar and 31 bytes of static RAM, via a simple serial interface to communicate with the microcontroller. Real-time clock / calendar circuit provides seconds, minutes, hours, days, weeks, months, ye..
Rs250/-
Brand: Arduino
OVERVIEW:The 2.4″ Colour TFT display with micro SD card slot is now available as a SHIELD for Arduino UNO.It has a four wire resistive touch screen, a micro SD card socket,a reset switch and a convenient arduino Uno shield footprint. SPECIFICATION:2.4 inch LCD TFT display ..
Rs1,500/-
Brand: Sparkfun
The FTDI cable is a USB to Serial (TTL level) converter which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this FTDI cable are configured to operate at 5V.The FTDI cable is designed around an FT232RQ, which is housed in a USB A connector. The other side of the cab..
Rs2,200/-
Nokia 5110 LCD
Inquiry
Brand: Arduino
FEATURES:Operating Voltage is 2.7V to 3.3VCurrent consumption is 6mAConsists of 48 rows and 84 columns (84×48) monochrome pixels  Works using SPI interfaceConsists of Philips PCD8544 interface chip for easy interfacing Can be easily interfaced with ArduinoSupports decent graphics of b..
Rs550/-
Showing 1 to 17 of 17 (1 Pages)