Micro SD Card Breakout Module

• Onboard 5v->3v regulator provides 150mA for power-hungry cards.

• 3v level shifting means you can use this with ease on either 3v or 5v systems.

• Uses a proper level shifting chip, not resistors: less problems and faster read/write access.

• Use 3 or 4 digital pins to read and write 2Gb+ of storage.

• Activity LED lights up when the SD card is being read or written.

• Four #2 mounting holes.

• Push-push socket with card slightly over the edge of the PCB so its easy to insert and remove.

• Comes with 0.1" header (unattached) so you can get it on a breadboard or use wires - your choice.

• Tested and assembled here at the Adafruit factory.

• Works great with Arduino, with tons of example code and wiring diagrams.

Document: