APC Smart-UPS C 1500VA LCD 230V - SMC1500I

Inquiry APC Smart-UPS C 1500VA LCD 230V - SMC1500I

FEATURES:

Cold-start capable: Provides temporary battery power when the utility power is out.

Green mode: Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

High online efficiency: Reduces utlility costs, generates less heat.

LCD Status Display: Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs

Pure sine wave output on battery: Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.

Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature.


Adaptability:

Adjustable voltage-transfer points: Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.

Adjustable voltage sensitivity: Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.


Serviceability:

Resettable circuit breakers: Enables a quick recovery from overload events.

Predictive failure notification: Provides early-warning fault analysis ensuring proactive component replacement.

Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

User-replaceable batteries: Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)


Manageability:

LED status indicators: Quickly understand unit and power status with visual indicators.

Serial connectivity: Provides management of the UPS via a serial port.

Network manageable: Provides remote power management of the UPS over the network.

Audible alarms: Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.

Disconnected battery notification: Warns when a battery is not available to provide backup power.

USB connectivity: Provides management of the UPS via a USB port (not available on all models).


Availability:

Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced

Automatic restart of loads after UPS shutdown: Automatically starts up the connected equipment upon the return of utility power.

Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.

Boost and Trim Automatic Voltage Regulation (AVR): Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature.

Power conditioning: Protects connected loads from surges, spikes, lightning, and other power disturbances.

Disconnected battery notification: Warns when a battery is not available to provide backup power.

Output
Output power capacity 900Watts / 1.5 kVA
Max Configurable Power (Watts) 900Watts / 1.5 kVA
Nominal Output Voltage 230V
Output Frequency (sync to mains) 47 - 53 Hz for 50 Hz nominal, 57 - 63 Hz for 60 Hz nominal
Output Voltage Distortion Less than 5% at full load
Topology Line Interactive
Waveform type Sine wave
Input
Nominal Input Voltage 230V
Input frequency 50/60 Hz +/- 3 Hz (auto sensing)
Input Connections IEC-320 C14
Batteries & Runtime
Battery type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time 3hour(s)

Write a review

Note: HTML is not translated!
    Bad           Good

Captcha
  • Views: 639
  • Brand: APC
  • Product Code: PSUP-04
  • Availability: Inquiry
  • Rs72,600