Instek GDS-1102-U 100 MHz Digital Storage Oscilloscope

Instek GDS-1102-U 100 MHz Digital Storage Oscilloscope


The GDS-1102-U is a 100 MHz digital storage oscilloscope with 5.7" color TFT LCD display. With dual sampling modes, a 4,000 point record length, a real-time sampling rate of 250 MSa/s and an ET sampling rate of 25GSa/s, the GDS-1102-U DSO provides an excellent balance of performance between memory length and sampling speed. Other major features include user-friendly menu tree operations, compact size, ergonomic design, USB host for PC connectivity and USB device port support. The GDS-1000-U Series is designed to meet today's most demanding engineering requirements and budgets.

USB Interface & Data Logger

The USB Host port on the front significantly enhance the data storage capability of the product. The large amount of data, including screenshot, waveform and panel setup, could be easily stored into a popular flash disk. A USB device port on the rear of the product transfers the screen image and waveform raw data to PC — and also allows your PC to remotely control the GDS-1102-U DSO.

Waveform Saving & Automatic Measurement

A total of 15 waveforms can be saved into memory to be displayed at a later time. Two saved reference waveforms and two live waveforms can be compared on the screen at the same time. All signal time and voltage related measurements can be shown on the screen simultaneously in real-time via the Measure key press.

Enhanced Calibration Signal Output

The GDS-1102-U has an enhanced 1kHz calibration signal. Its output frequency is adjustable from 1 kHz to 100 kHz and has an adjustable duty cycle of 5% to 95%. Due to the flexible output, the calibration output can also be used as a basic signal generator for other applications.

Autoset Disable Function

For educational purposes, instructors might not want to use the Autoset function on the DSO when they are teaching how to use oscilloscopes. On the GDS-1000-U Series, the Autoset function can be disabled, allowing students to manually operate the oscilloscope functions to further enrich their learning experience.

Go/NoGo Function

Go/NoGo testing function check whether the incoming signal violates the user-defined template. Users can easily define this template by setting the tolerance ratio to determine violation conditions. Go/NoGo testing can either keep counting violation number or stop testing when violation conditions are met.


100 MHz Bandwidth with 2 Input Channels
250MSa/s Real-Time and 25GSa/s Equivalent-Time Sampling
4k Memory Length per Channel
Peak Detect as Fast as 10ns
Save/Recall of 15 Front Panel Settings & Waveforms
5.7" TFT Color Display
19 Auto Measurements
Arithmetic Operators - Add, Subtract, FFT
USB Port for PC Connection
Data Logger

Write a review

Note: HTML is not translated!
    Bad           Good

  • Views: 805
  • Product Code: MTAM-0198
  • Availability: In Stock
  • Rs49,500
AC Voltage Range: 90 to 600VDetects voltage without contactBuilt-in flashlight with on/off buttonFla..
DESCRIPTION: GM8905 Non-Contact Handheld LCD Digital Laser Tachometer RPM Tach Tester Meter Moto..
FEATURES:Water flow sensor consists of magnetic core, rotating impeller, external casing and sensor ..
FEATURES:Measurement items: Air velocity, Air temperature ,Air QuantityMeasurement range: Air v..
FEATURES:Unit of Velocity: m/s, ft/min, knots, km/hr, mphºC/ºF SelectionBacklight displayMax/Min rea..
FEATURES:Unit of Velocity: m/s, ft/min, knots, km/hr, mphºC/ºF SelectionAir temperature measuring er..
OVERVIEW:This PH sensor Module consists of PH sensor also called as PH probe and a Signal Conditioni..