BX-150 Dry Block Temperature Calibrator

Inquiry BX-150 Dry Block Temperature Calibrator

OVERVIEW:

The REED BX-150 is a dry block calibrator that offers fast heat-up and cool down times with excellent performance specifications at a wide operating temperature range and is a fast, accurate, stable solution for calibrating RTDs, thermocouples, and small bimetal thermometers in both the laboratory and in the field. Because temperature measurement is a critical parameter in many industrial processes, a temperature calibrator is necessary to remove inaccuracies in installed thermometers and temperature sensors.


FEATURES:

Closed loop microprocessor based digital PID temperature controller system incorporating a heater and a precision platinum RTD sensor.

Fan cooling allows rapid changes in block temperature upon demand.

Required temperature may be adjusted in 0.1° increments using front panel buttons.


SPECIFICATION:

Temperature Range33.0 to 300.0°C (91.4 to 572.0°F)
Resolution0.1°C/°F
Accuracy±0.8°C (±1.6°F) ≤ 100°C (≤ 212°F)
±1.6°C (±3.2°F) 100-200°C (212-392°F)
±2.8°C > 200°C (> 392°F)
Stability±0.1°C (±0.2°F) ≤100°C (≤212°F)
±0.2°C (±0.4°F) 100-200°C (212-392°F)
±0.4°C (±0.8°F) >200°C (>392°F)
Time to Stability10 to 20 minutes
Heating/Cooling Time30 min. to max./30 min. to 100°C (212°F)
Power Supply110VAC (±10%), 2.5A
Well Diameters1 x 1/4", 1 x 3/16", 1 x 5/32", 2 x 1/8"
Well Depth90mm

Write a review

Note: HTML is not translated!
    Bad           Good

Captcha
  • Rs147,000